123

■Technical Specifications
. Power Level: 30 - 43dBm (1.0dB Step)
. Power Accuracy: ±0.1dB
. IM Measurement: -125dBm (@2-Tone 43dBm)
. Average Noise Floor : -140dBm
. Frequency Increment: 100 kHz
. Frequency Accuracy: ...

Customized Multi Band PIMD Analyzer

■Easy Frequency Selection (User-friendly GUI Interface)
■Auto Test Module for Individual, Combined Frequencies (Optional)
■Test all ports by one-time cable connection
■Forward Input Power : Max. -30dBm
■Any Frequency Combinat...

Customized Multi-Tone PIMD Analyzer

■No cable connection change required during all multi-band tests
■Easy Frequency Selection (User-friendly GUI Interface)
■Auto Test Module for Individual, Combined Frequencies (Optional)
■Test all ports by one-time cable connection

Standard Single Band PIMD Analyzer (700MHz ? 3.5GHz)

■ Technical Specifications
. Power Level: 33 - 44dBm
. IM Measurement (Reverse): -166 ~ 168dBc
. Average Noise Floor: -140dBm
. Dimensions (D×W×H): 508×482.6×175.3 mm

3.5GHz / 5G Filter Series

■ Can be made to meet customer's requirements.
- Low insertion loss
- Low PIMD
- Compact size

Divider / Coupler Series

■ Divider / Coupler: Device that distributes signals to two or more ports or collects them into one port.
■ Can be made to meet customer's requirements.
- Low insertion loss
- Low PIMD
- Compact size

Multiplexer Series

■ It is composed of triplexer, quadplexer and quintplexer depending on the number of output ports.
■ Can be manufactured to customer's requirements
- Low insertion loss
- Low PIMD
- Compact size
- IP 67

BPF(Band Pass Filter) Series

■ BPF: This filter passes only a specific frequency.
■ Can be made to meet customer's requirements.
- Low insertion loss
- Low PIMD
- Compact size
- IP 67

BRF / LPF / HPF Series

■ BRF: A filter that prevents passing only a specific frequency.
■ LPF: A filter that allows only low frequency bands to pass.
■ HPF: Filters that allow only high frequency bands to pass.
■ Can be manufactured to customer's requireme...

Diplexer Series

■ It is a component to share RF signal of transmitter and receiver in one antenna and consists of two band pass filters.
■ Can be manufactured to customer's requirements
- Low insertion loss
- Low PIMD
- Compact size
- ...

Duplexer Series

■ It is a component to share RF signal of transmitter and receiver in one antenna and consists of two band pass filters.
■ Can be manufactured to customer's requirements
- Low insertion loss
- Low PIMD
- Compact size
- ...

925~937.5MHz Band Digital Portable Receiver VR-C29

The VOCALLUX VR-C29 Digital Portable Receiver uses the UHF band.
By adopting Digital Modulation (QPSK) technique, it can be used many channels in the same place without interference.

470~950MHz Wideband Antenna Distributor IDA-W19

The operating frequency of the VOCALLUX IDA-W19 wideband distributor is 470-950 MHz. With 4 input ports and 16 output ports, it is possible to secure a wide RF transmit/receive radius.

925~937.5MHz Antenna Distributor/Combiner IDA-A19

The VOCALLUX IDA-A19 is UHF band dedicated distributor/combiner-integrated system. (selectable to switch mode)

470~950 MHz Band LPDA Active Antenna IDE-WP19

The operating frequency of the VOCALLUX IDE-WP19 is 470-950 MHz, which is a wideband Active LPDA antenna. The booster gain can be adjusted from -8 to + 18dB to suit the site RF environment.

925-937.5MHz Directional Dipole EXT Antenna IDE-A19

The VOCALLUX IDE-A19 directional external antenna uses the 925-937.5 MHz band of the UHF band. Pure antenna gain is 6dBi and the RF level attenuation can be adjusted for various sites.

925-937.5MHz Antenna Booster Amp IDAB-A19

The VOCALLUX IDAB-A19 Antenna Booster Amplifier employs proprietary patented ALC circuitry to suppress excessive RF ingress and unwanted signal interference, creating a more stable RF environment.

470~950MHz IEM Transmitter combiner ITC-W19

IEM transmitter combiner is used 470~950MHz. Transmit with single antenna having input of 4 IEM transmitter combiner.

Ferrite Microwave Devices and Elements

고객 요구사항에 따라 제작 가능한 폐라이트 제품입니다.

Ferrite Microwave Materials

고객 요구사항에 따라 제작 가능한 페라이트 제품입니다.